Bronco 4-Door Car Covers: PEVA with Cotton Lining or 420D Oxford?

Both covers we list for the Bronco are made for the 2021-2026 4-Door. They differ in material, in how they stay on in wind and in a few practical details. Here is what each listing states.

PEVA cover with cotton lining

This cover has a waterproof PEVA outer layer and a soft spunlace cotton lining on the inside, where the cover touches the paint. Two side air vents let air move under the cover to reduce trapped heat and moisture and to cut down on billowing. Adjustable windproof straps and an elastic hem hold it in place. The listing gives its design size as about 189 x 76 inches (length x width).

420D Oxford cover with zipper

This cover is made of 420D Oxford fabric and listed as waterproof. A zipper on the driver's side gives you door access, reflective strips around the body make it easier to see at night, and four buckles at the wheels plus an elastic hem keep it on in wind.

Side by side

Which one suits how you park

• You want a lining against the paint: the PEVA cover has the cotton inner layer.
• You want to get in without taking the cover off: the 420D cover has the driver-side zipper.
• You park on the street at night: the 420D cover has reflective strips.
• You're worried about heat or moisture under the cover: the PEVA cover has two side air vents.

Tips for either cover

• Put the cover on a clean, dry vehicle so dirt and moisture aren't trapped against the paint.
• Use every strap or buckle when it's windy.
• Let the cover dry before you fold it and put it away.

Both covers are listed for the 4-Door only. For everything else we list for the Bronco, see our Bronco accessories guide.

Please message us your exact model year and trim before ordering.

Ford and Bronco are trademarks of their respective owner.