5-in-1 Portable Car Jump Starter with 150 PSI Air Compressor, Power Bank and LED Light for 12V Vehicles, 10000 or 12000mAh
5-in-1 Portable Car Jump Starter with 150 PSI Air Compressor, Power Bank and LED Light for 12V Vehicles, 10000 or 12000mAh
Regular price
$78.99
Regular price
$78.99
Sale price
$0.00
Unit price
/
per
 
Couldn't load pickup availability
 
add_shopping_cart
-
Ordered
local_shipping
- - -
Order Ready
redeem
- - -
Delivered
5-in-1 Portable Car Jump Starter with 150 PSI Air Compressor, Power Bank and LED Light for 12V Vehicles, 10000 or 12000mAh
Regular price
$78.99
Regular price
$78.99
Sale price
$0.00
Unit price
/
per
A portable jump starter and tire inflator in one. Use the smart clamps to jump-start a 12V vehicle, top up tires with the built-in 150 PSI air compressor, charge your phone from the USB port, and light up the engine bay with the LED light. Everything packs into the included storage case.
Key Features
- Jump starter for 12V vehicles: smart clamps connect to the car battery so you can start the engine without another car.
- Smart clamp protection: the supplier lists 13 protections, including reverse-polarity, short-circuit, over-current, over-charge, over-discharge and over-heat protection.
- Tire inflator up to 150 PSI: presets for car (2.5 bar), motorcycle (2.4 bar), bike (45 PSI) and ball (8 PSI); it shuts off automatically at the set pressure.
- Digital display: shows pressure in PSI, BAR, kPa or kg/cm².
- Power bank: the USB-A output charges your phone; the unit recharges through USB-C.
- LED light: steady light, SOS and strobe modes.
Specifications
| Battery capacity | 10,000 mAh or 12,000 mAh |
| Vehicle voltage | 12V |
| Maximum inflation pressure | 150 PSI |
| Input | USB-C |
| Output | USB-A |
| Dimensions | 7.5 x 4.3 x 2.2 in (19 x 11 x 5.5 cm) |
What's in the Box
- 1 x jump starter with air compressor
- 1 x smart jumper clamps (red and black)
- 1 x inflation hose
- 4 x nozzle adapters
- 1 x USB-C charging cable
- 1 x storage case
- 1 x instruction manual
How to Jump-Start a Vehicle
- Plug the smart clamps into the jump starter's output port.
- Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (−) terminal.
- Start the engine.
- Once the engine is running, remove the clamps from the battery and unplug them from the jump starter.
How to Inflate a Tire
- Attach the inflation hose to the unit, then connect its nozzle to the tire valve.
- Press the mode button to choose a mode and use + and − to set the target pressure. Check your vehicle's recommended tire pressure first; it's usually on a sticker inside the driver's door.
- Press and hold the mode button to start. It stops automatically at the set pressure.
Good to Know
- Not sure it will start your vehicle? Message us your engine size and fuel type before ordering.
- Dimensions are measured by hand; allow a small difference.
Real photos of this product

@btmerch.co
Follow on InstagramTag & Share
Tag @btmerch.co for a chance to be featured here.