Digital Tire Inflator Gauge with Hose and Clip-On Chuck, 200 PSI Backlit LCD, for Air Compressors

A digital tire inflator gauge for use with an air compressor. Connect it to your compressor's air line, clip the chuck onto the tire valve and squeeze the trigger to add air while the backlit LCD shows the pressure. If you go over, press the release button to let air out until the reading is right.

Key Features

• Inflate, deflate and measure: the trigger adds air, the release button lets air out, and the display shows the pressure as you go.
• Up to 200 PSI: for car, SUV, truck, motorcycle and bike tires.
• Backlit LCD: reads in PSI, kPa, bar or kg/cm² and stays readable in low light.
• Clip-on chuck: the brass chuck clips onto the tire valve so you don't have to hold it in place.
• Protective rubber cover: a shock-resistant cover around the gauge head helps protect it from knocks and drops.

Specifications

• Measuring range: 3 to 200 PSI
• Units: PSI, kPa, bar, kg/cm²
• Display: 2.5 in backlit LCD
• Air inlet: 1/4 in thread
• Working temperature: -4°F to 176°F (-20°C to 80°C)
• Color: black and red

What's in the Box

• 1 x digital tire inflator gauge with hose and chuck

How to Use

1. Connect the air inlet to your air compressor's line.
2. Press the power button to turn on the display and choose the unit.
3. Clip the chuck onto the tire valve and squeeze the trigger to add air.
4. If the pressure is too high, press the release button to let air out. Check your vehicle's recommended tire pressure first; it's usually on a sticker inside the driver's door.

Good to Know

• This gauge needs an air compressor to add air; it does not pump air by itself.
• Check that your compressor's fitting matches the 1/4 in inlet before ordering.
• Measurements are taken by hand and may vary slightly.

Real photos of this product