4-in-1 Car Jump Starter and 150 PSI Tire Inflator with 2.4 in Display, Power Bank and LED Flashlight, 12V, 12000 or 16000mAh
4-in-1 Car Jump Starter and 150 PSI Tire Inflator with 2.4 in Display, Power Bank and LED Flashlight, 12V, 12000 or 16000mAh
Regular price
$76.99
Regular price
$76.99
Sale price
$0.00
Unit price
/
per
 
Couldn't load pickup availability
 
add_shopping_cart
-
Ordered
local_shipping
- - -
Order Ready
redeem
- - -
Delivered
4-in-1 Car Jump Starter and 150 PSI Tire Inflator with 2.4 in Display, Power Bank and LED Flashlight, 12V, 12000 or 16000mAh
Regular price
$76.99
Regular price
$76.99
Sale price
$0.00
Unit price
/
per
A four-in-one roadside kit: a jump starter for 12V vehicles, a 150 PSI tire inflator with a 2.4-inch display, a power bank for your phone, and an LED flashlight. It comes with smart jumper clamps and a storage case.
Key Features
- Jump starter for 12V vehicles: the supplier rates it for gas engines up to 7.0L and diesel engines up to 6.0L.
- Smart clamps: built-in protection, including reverse-polarity, short-circuit, over-charge and spark-proof protection; the indicator light turns green when it's ready to start.
- Tire inflator up to 150 PSI: modes for car, motorcycle, bike, ball and inflatables, with the preset and real-time pressure on the display.
- 2.4-inch LED display: shows inflation mode, pressure unit, battery level, real-time pressure and preset pressure.
- Power bank: charge your phone from the USB-A output; recharge the unit through USB-C.
- LED flashlight: normal, SOS and strobe modes.
Specifications
| Battery capacity | 12,000 mAh or 16,000 mAh |
| Vehicle voltage | 12V |
| Engine size (supplier rating) | Gas up to 7.0L, diesel up to 6.0L |
| Maximum inflation pressure | 150 PSI |
| Input | USB-C |
| Output | USB-A |
| Weight | about 3 lb (1.35 kg) |
What's in the Box
- 1 x jump starter with air compressor
- 1 x smart jumper clamps (red and black)
- 1 x inflation hose
- 4 x nozzle adapters
- 1 x USB-C charging cable
- 1 x storage case
- 1 x instruction manual
How to Jump-Start a Vehicle
- Plug the smart clamps into the jump starter.
- Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (−) terminal.
- When the indicator light turns green, start the engine.
- Once the engine is running, remove the clamps from the battery and unplug them from the jump starter.
How to Inflate a Tire
- Connect the inflation hose to the unit and to the tire valve.
- Choose the mode and set the target pressure. Check your vehicle's recommended tire pressure first; it's usually on a sticker inside the driver's door.
- Start inflating and watch the real-time pressure on the display.
Good to Know
- Not sure it will start your vehicle? Message us your engine size and fuel type before ordering.
Real photos of this product

@btmerch.co
Follow on InstagramTag & Share
Tag @btmerch.co for a chance to be featured here.