4 x 80W DSP Car Amplifier with App EQ Control and Bluetooth Music, Plug-In 16-Pin Harness for Aftermarket Android Head Units

A 4 x 80W DSP amplifier for cars with an aftermarket Android head unit, whose built-in amp is usually small. It plugs in with a standard 16-pin harness, and you tune the sound from a phone app.

Key Features

• 4 x 80W output: more power for four speakers than a typical Android head unit's built-in amp.
• App EQ control: adjust the DSP sound settings from an iOS or Android app.
• Many inputs: optical, coaxial, AUX, USB and Bluetooth music.
• RCA output: for adding another amplifier or a subwoofer.
• Plug-in install: standard 16-pin harness; no wire cutting.

Compatibility

• For 12V cars with an aftermarket Android head unit.
• Not sure it fits? Message us your head unit model and your car's make, model and year.

Specifications

• Output power: 80W x 4
• Signal-to-noise ratio: over 70 dB
• Distortion: 0.1%
• Operating voltage: 9 to 16V (12V systems)
• Maximum working current: 25A
• Standby current: 5 mA
• Inputs: optical, coaxial, AUX, USB, Bluetooth
• Output: RCA

What's in the Box

• 1 x DSP amplifier
• 1 x 16-pin power harness
• Connection cables, as shown in the package photo

How to Install

1. Turn the car off and remove the Android head unit.
2. Connect the 16-pin harness between the head unit and the car's wiring, and ground the black wire.
3. Refit the head unit, power on and pair the app to adjust the sound.

Good to Know

• If you hear noise, check that every connector is secure and the ground wire is attached.
• If you're not comfortable removing your head unit, have it installed by a car audio shop.

Real photos of this product