Suction Cup Car Phone Mount with Multi-Joint Arm, 360 Degree Rotation for Dashboard or Windshield

A suction cup phone mount with a multi-joint arm that adjusts at every joint, so you can set your phone at the height and angle you want on the dashboard or windshield.

Key Features

• Multi-joint arm: adjust each joint to raise, lower or angle the phone; 8.6 in tall folded, 11.8 in extended.
• 360° cradle: switch between portrait and landscape.
• Locking suction base: press the cup down and turn the silver ring to seal it, then push the locking switch to hold the arm in place.
• Clip button release: press the clip button to open the side arms; the bottom support adjusts for different phones.

Specifications

What's in the Box

• 1 x phone mount

How to Install

1. Wipe the dashboard or glass clean.
2. Peel the protective film off the suction cup.
3. Press the suction cup onto the spot and turn the silver ring clockwise to lock it.
4. Rotate the arm into position, push the locking switch to lock it, then adjust each joint.

Good to Know

• Check your state's rules on windshield mounting.

Real photos of this product